Micro-6 - Charging Adapter for Ultra Micro Lipos

Micro-6 - Charging Adapter for Ultra Micro Lipos Review

Micro-6 - Charging Adapter for Ultra Micro Lipos Feature

• Charge up to six Ultra Micro lipos at one time
• Designed for use with Ultra Micro lipos utilizing the Parkzone/E-flite Blade mCX-style micro connect
• Compatible with batteries used in the ParkZone Vapor, Ember/2, Sukhoi, P-51, and J-3 Cub

Micro-6 - Charging Adapter for Ultra Micro Lipos Overview

Stop spending so much time charging, and spend more time flying! With the Micro-6 you can charge up to six Ultra Micro lipos at one time! The Micro-6 allows you to use any lithium battery charger that supports 1S (3.7V) Lithium batteries via a standard JST connector to charge Ultra Micro lipos.Designed for use with Ultra Micro lipos utilizing the Parkzone/E-flite Blade mCX-style micro connector. Compatible with batteries used in the ParkZone Vapor, Ember/2, Sukhoi, P-51, and J-3 Cub as well as E-flite's Blade mCX, S300, MSR, Tandem Rescue and Ultra-Micro 4-Site. This adapter is designed to allow you to connect Ultra Micro 1-cell batteries via a JST connector to the LiPo charger of your choice. The adapter connects them in parallel, accommodating batteries of different capacities. By charging in parallel the only requirement is that all cells must be near their normal discharged state before connecting together and consequently charging. You have complete control over the charge rate, allowing you to choose a safe 1-hour charge for max battery life. The adapter simply allows you to connect up to 6 batteries in parallel so that you can charge them as a single larger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be reasonably close in charge level. For example, if you either time your flights or fly till cutoff. You want to avoid connecting a fully charged battery to a group of discharged cells, since a rapid rush of current would occur. As you plug in the batteries they will be tied together and will self balance. Then connect the JST connector to your existing charger that supports 1 cell (1s) charging and set the charge mA to the sum total of the mAh rating for each cell. You can even mix 70mAh with 110mAh, 150mAh, 250mAh and so on. Since they all receive the same voltage each cell only takes the mA it needs to charge to 4.2 volts max.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Jul 14, 2011 23:40:22

Friends Link : you can find more Cheap and Buy Direct from Amazon